Junior Production Associate-7
ROCKWOOL Group
Chennai, Tamil Nadu, India0–2 yrs17m agovia LinkedIn
Posted 18 Nov 2026, 16:15 IST
This job at a glance
- Who can apply
- Freshers and up to 2 years
- Work
- On-site in Chennai
- Pay
- Not stated by the employer.
- Listed
- 18 Nov 2026 · still open
ROCKWOOL Group is seeking a Junior Production Associate.
Key Responsibilities
- Take charge from previous shift associate, ensuring proper house-keeping.
- Ensure all PPE (e.g., Kevlar gloves, heat protection, helmet with face shield) is in place.
- Verify that during breakdown and shutdown maintenance, personnel are working with proper Work Permit and LOTO.
- Review production plans and ensure products align with the plan.
- Inspect the condition of all cupola tools and tackles.
- Check spinner lubrication oil level and rotter cooling flow.
- Monitor melt temperature and viscosity as per schedule.
- Inspect the brightness of tuyers, toughen glass, and siphon condition, performing necessary pocking.
- Continuously monitor the condition of all gutters and clean them as needed.
- Check the bell hopper condition, cupola cooling water level, and spinner cooling water level twice per shift.
- Ensure the high-pressure water jet is running properly.
- Verify that all holes in SPC drum lamella plates are clean and that wool lifting is working correctly.
- Inspect the condition of the dryer and wool lifter blower belt.
- Check all conveyors in the spinning chamber and the condition of the SPC drum cleaning brush.
- Maintain cleanliness of the waste wool conveyor and dewatering system conveyor.
- Perform on-line/off-line iron tapping.
- Conduct weigh scale calibration by placing physical weight with assistance during log dropdown.
- Review cupola process parameter sheets during production and report any deviations to the Executive Engineer-Production.
- Hand over charge to the next shift associate, including proper house-keeping.
- Check the schedule for jumbo bag replacement, inspect its condition, and replace if full.
- Ensure compliance with checklists for items such as:
- Sufficient quantity of iron tapping rods.
- Operational iron tapping and gas torch units.
- Availability of O2 and acetylene cylinders, replacing empty ones.
- Minimum of 4 oxygen bottles and 2 acetylene bottles in spare.
- Spinner workshop hoist is in running condition, reporting any abnormalities.
- Change the spinner cooling filter every 24 hours during spinner changes.